Readme.txt

RLE Technologies has created and maintains a library of drawings representing the Falcon, Falcon accessories and third party Data Center equipment such as UPS, CRAC units etc.   The intent of the drawing library is to enable RLE customers to create Falcon wiring diagrams for use during installation of Falcon Monitoring Systems.  The drawing library also serves as a reference by showing the available monitoring points of typical equipment.    

Although the information contained in these documents is believed to be accurate and correct, RLE Technologies assumes no responsibility, and disclaims all liability, for any damages resulting from the use of this information or any error or omission in this document.  Further, RLE Technologies does not warrant, guarantee, or make an representations as to the performance, fitness for use, safety, or reliability of any existing or future wiring, equipment, additions or modifications to equipment, or any other component of the original or modified system.

The drawings and stencils are created using Microsoft® Visio® 2000.  Any requests for error corrections and additions are appreciated and can be submitted to support@rletech.com.

Files:
FalconStencil Rev1.vss – This Visio stencil contains blocks for the Falcon, Accessories such as T120, TH140, PFM, KPO, LDZs, etc and a basic title block.

DataCenterDevicesRev1.vss - This Visio stencil contains the I/O terminals for Data Center components such as Liebert System 3 CRAC unit, MGE Galaxy UPS, Powerware UPS etc.   

ExampleWiringRev1.vsd – This Visio drawing shows an example on how the stencils can be used to create a Falcon wiring diagram.

Jan 2005:  Rev 1.  Initial Release.