 |
Products
SeaHawk
Falcon
Raptor
|
SeaHawk Accessories
|
RLE offers a number of accessories that support its SeaHawk water leak detection product line.
X-CON - X-Connector:
The X-CON is used to route Water Leak Detection Cable in multiple directions without the need to double back on a run. Each branch of cable is terminated with an EOL terminator. The X-CON can be used with any SeaHawk Water Leak Detection Panel.
Additional Information (size 471k PDF)
|
|
LC-Kit for SC Cable:
An LC-Kit is required to use Water Leak Detection Cable with SeaHawk leak detection panels. One kit is required for every cable input. Each
LC-Kit includes a 15-foot leader cable and an EOL.
|
 |
J-Clips for SC Cable:
J-clips are needed to secure SeaHawk Water Leak Detection Cable to the floor. J-clips are self-adhesive and should be placed at 4-foot intervals and bends along the length of the water leak detection cable. If the cable is in a direct air stream, such as in front of an air conditioning unit, the J-clips should be placed at 18-inch intervals.
Additional Information (size 134k PDF)
|
 |
NSC - Non-Sensing Cable:
SeaHawk NSC is used to connect sections of Water Leak Detection Cable through areas where no water leak detection is required. NSC is available in 10, 25, 50 and 100 foot (3m, 7.5m, 15m, and 30m) lengths with pre-installed end connectors.
Additional Information (size 452k PDF)
|
 |
Weighted Cable Connector
The Weighted Cable Connector simulates 50 feet of SeaHawk Water Detection Cable to help with leak location.
Additional Information (size 157k PDF)
|
 |
Framed 11" x 14" Reference Map
A reference map of your facility is used in conjunction with the SeaHawk distance read panels - LD5100 and LD2000. Once the panel displays the distance to a leak, that distance can be cross referenced with the map to determine the location of the leak, conductive fluid, or problem within your facility.
|
 |
Other Accessories:
A variety of other water detection system components are available, including:
- Wall adapter - 24VAC
- Wall adapter - 24VDC
- Power supply in J-box (120VAC in/24VAC out)
- Replacement EOL terminator
- Universal cable tester
Contact RLE for more information regarding SeaHawk water leak detection system accessories.
Get more information in order to choose the water leak detection system that fits your company's needs:
Choosing the Right Water Detection System (160k PDF)
|
|
|
RLE Technologies - The Power of Engineered Solutions
SeaHawk Water Leak Detection Systems
copyright © RLE Technologies. All rights reserved.
|
|
