 |
Products
SeaHawk
Falcon
Raptor
|
SeaHawk SD - Spot Water Leak Detection
|
As spot detectors, the RLE SeaHawk SD Series of products provide the most cost-effective way to report the presence of water and any other conductive liquid.
SeaHawk spot detector products use polymer-coated sensing probes to detect water and other conductive fluids at a single point. They are
|
|
commonly used to identify water in a contained area, such as small rooms, air conditioning drip pans, and around floor drains.
The SD Series of products use two water-detecting probes, with an adjustable height to ¾ inch, and a 14-feet leader cable.
Water Detection System Integration
Each SeaHawk SD sensor must connect to a control module - such as the RLE Falcon RASP (Remote Alarm Status Panel) - as it does not provide audible or visual annunciation by itself. A typical application uses multiple SeaHawk SD sensors connected to a control panel.
|
SeaHawk SD models to integrate with various control modules:
|
SeaHawk SD-RO1
for any panel accepting dry contacts.
|
SeaHawk SD standard
for Falcon RASP panels and Falcon Monitoring Systems.
|
SeaHawk SD-Z
for use with Zone products, which can be used in conjunction with water detection cable to integrate both zone and spot detection in one panel.
|
Additional SD Series Documentation
|
|
|
 |
|
| |
SD Series Leak Detection
- Most Economical Solution
- Integration Options
with control modules
- Simple Installation
using screw or ram set to floor
- Adjustable Height
up to 3/4 inch
- Low Corrosion Potential
due to lack of exposed metal sensing posts
- No Maintenance
- Includes Leader Cable
- Low Voltage Input Power
|
|
All SeaHawk Products
|
| |
 |
|
RLE Technologies - The Power of Engineered Solutions
SeaHawk Water Leak Detection Systems
copyright © RLE Technologies. All rights reserved.
|
|